Wells & water/ CALCULATOR
Pump head & electrical power
Combine lift, delivery pressure and friction in a first-pass pump calculation.
Delivery elevation minus pumping-water elevation.
Pressure required at the chosen delivery point.
Obtain from pipe and fitting calculations.
Check against the pump curve and available well yield.
Explicit estimate including motor and pump.
Total dynamic head
60.6 m
Estimated electrical input
0.45 kW
Water density 1,000 kg/m³; gravity 9.80665 m/s². Does not select a pump or establish starting power. Verify the pump curve at both required flow and head.
Continue your calculation
Wells & water
Household water demand
Estimate daily use and an explicit buffer-storage volume.
Wells & water
Well drawdown & specific capacity
Interpret water levels from a recorded pumping test.
Wells & water
Water volume in a round tank
Estimate the water held in a vertical cylindrical tank from its internal dimensions.
Wells & water
Water stored above a well-pump reserve level
Estimate the cylindrical water column and volume above a protected pump-intake level.
Wells & water
Observed well water-level recovery
Convert a measured rise in a cylindrical well into equivalent volume and an average recovery observation.